搜索结果: 1-13 共查到“金属材料 titanium”相关记录13条 . 查询时间(0.046 秒)
New ‘High-Entropy’ Alloy Is As Light As Aluminum, As Strong as Titanium Alloys
High-Entropy As Light As Aluminum As Strong as Titanium Alloys
2014/12/10
Researchers from North Carolina State University and Qatar University have developed a new “high-entropy” metal alloy that has a higher strength-to-weight ratio than any other existing metal material....
Mechanical properties of ultra-fine grain titanium
Mechanical properties ultra-fine titanium
2010/5/12
It is required that a material for dental implants is bio compatible, it must not be toxic and it may not cause allergic reactions [1]. It must have high ultimate strength Rm and yield value Rp0,2 at ...
The 12th World Conference on Titanium
The Nonferrous Metals Society The 12th World Conference Titanium
2010/4/7
The 12th World Conference on Titanium (Ti-2011) is the 12th in a series of meetings held every four years since 1968, with purpose of bringing together the worldwide titanium community to present and ...
The influence of initial plastic deformation on microstructure and hot plasticity of α+β titanium alloys
Titanium alloys Thermomechanical process Hot deformation Heat treatment β-solution
2010/2/2
Two phase titanium alloys most often are hot deformed, mainly by open die or die forging. Achievement of desired mechanical properties is related to development of proper microstructure in plastic wor...
The 12th World Conference on Titanium Beijing, China June 19-25, 2011 organized by The Institute of Materials, Minerals and Mining, UK,The Minerals, Metals and Materials Society (TMS),USA and The Ame...
Influence of workpiece inclination angle on the surface roughness in ball end milling of the titanium alloy Ti-6Al-4V
Machining Ball end milling Workpiece inclination angle
2009/12/14
Purpose: The aim of this work is to provide an in-depth understanding of the surface texture produced by various workpiece inclination angles using high speed finish ball end-milling of the titanium a...
Forming of the titanium implants and medical tools by metal working
Plastic forming Implants Biomaterials Titanium alloys
2009/12/1
Purpose: of this paper is to present some technological problems with forming of the titanium implants and
medical tools by the plastic working methods.
Design/methodology/approach: Application of...
Microstructure evolution of CP titanium during high temperature deformation
Superplastic materials Titanium Dynamic recrystallization Electron Back Scattered Diffraction
2009/12/1
Purpose: To investigate the superplasticity of commercially pure titanium alloy and microstructure evolution of
the alloy during high temperature deformation.
Design/methodology/approach: Uniaxial t...
Effect of Ternary Scandium and Quaternary Zirconium and Titanium Additions on the Tensile and Precipitation Properties of Binary Cast Al-6Mg Alloys
Al-Mg alloys precipitates strain hardening exponent
2008/6/30
Effect of ageing on the mechanical properties of Al-6Mg alloy doped with 0.4 wt% scandium and with or without trace
zirconium and titanium is studied. As cast, samples were aged isochronally for 60 m...
Carbon and titanium based layers for wood-based materials
Thin and thick coatings Chipboards machining Sintered carbide
2008/4/30
Purpose: The main purpose of this work was to work out the technology of manufacturing carbon and titanium based layers on the surfaces of sintered carbides machining edges used in furniture industry....
Purpose: The paper reports characteristic of superplasticity phenomenon in titanium alloys and possibility of its applications.Design/methodology/approach: The main objective of the paper is to show f...
Inoculation of aluminium with titanium and boron addition
Working properties of materials and products Aluminium Titanium
2007/7/30
Purpose: The main aim of studies was to determine mechanism of inocualtion of pure alumnium EN AW-Al99,5 structure with addition of titanium and boron, which are introduced to liquid metal in small am...