搜索结果: 1-11 共查到“金属材料 Application”相关记录11条 . 查询时间(0.093 秒)
The application of statistical models in wear resistance simulations of Al-Al2O3 composites
Composites Infiltration Simulation Statistical models
2010/5/1
Currently, the most widespread use have found the composite materials with the light metals matrix, and especially from the aluminium alloys, reinforced with the ceramic particles or fibres that can b...
A study on the CO2 laser welding characteristics of high strength steel up to 1500MPa for automotive application
A study CO2 laser welding characteristics high strength 1500MPa automotive application
2010/3/12
The automotive industry is continuously striving to develop light weight vehicles to address global warming. For light weight vehicles, the focus on materials is shifting increasingly from conventiona...
Derivative thermo-analysis application to assess the cooling rate influence on the microstructure of Al-Si alloy cast
thermo-analysis assess cooling rate microstructure Al-Si alloy cast
2010/2/12
Copper and magnesium addition enable to perform precipitation hardening of the multicomponent aluminium alloys with silicon, by precipitation of the Al2Cu or Mg2Si phase particles. However copper addi...
Microstructure, properties investigations and methodology of the state evaluation of T23 (2.25Cr-0.3Mo-1.6W-V-Nb) steel in boilers application
Steel T23 Structure Creep
2009/12/14
Purpose: The purpose of the paper is to work out the classification of the structure’s changes and the development of precipitation processes and the internal damages related to the exhaust degree of ...
Application of the artificial neural networks for prediction of magnetic saturation of metallic amorphous alloys
Computational material science Artificial neural networks Amorphous materials
2009/12/2
Purpose: The aim of the work is to employ the artificial neural networks for prediction of magnetic saturation of
the amorphous alloys with the iron and cobalt matrix.
Design/methodology/approach: I...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 2
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article, constituting continuation of the subject discussed in the first part, presents results of the experimental trial of water glass molding sands’ curing method modification with application...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 2
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article, constituting continuation of the subject discussed in the first part, presents results of the experimental trial of water glass molding sands’ curing method modification with application...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 1
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article presents results of the experimental trial of combination of the chemical method of water glass molding sands’ curing, used in foundry industry, with an innovative microwave heating. The ...
Determination of application possibilities of microwave heating in the curing process of water glass molding sands with fluid esters. Part 1
innovative foundry materials and technologies ester curing water glass molding sand microwaves
2009/2/26
This article presents results of the experimental trial of combination of the chemical method of water glass molding sands’ curing, used in foundry industry, with an innovative microwave heating. The ...
Silver – mishmetal alloy for application at elevated temperature
Metallic alloys Functional materials Metallography
2008/2/28
Purpose: The aim of this work was to investigate the changes taking place in the structure and properties of silver - mishmetal alloys caused by severe plastic deformation compared to the Ag+(7.5 wt %...
The 'full sleeve' application in the horizontal cold-chamber machine for pressure die casting of aluminium alloys
Pressure die casting Aluminium alloys Pressure chambe
2007/7/24
The ‘full sleeve’ construction has been designed and accomplished in the horizontal cold-chamber pressure die casting machine. Main part of this solution is a counter plunger placed in a movable die h...