搜索结果: 1-15 共查到“金属材料 Aluminium”相关记录28条 . 查询时间(0.056 秒)
Inoculation of pure aluminium aided by electromagnetic field
Foundry sand system Used sand Reclamation Waste management
2011/3/15
The article is devoted to the description of a new integrated system for processing and reclamation of moulding and core sands using the equipment developed by Foundry Research Institute in Krakow. Th...
Influence of Inoculation on Properties of Aluminium EN AW-Al99,5
Mechanical properties Aluminium Titanium Boron Electromagnetic field
2011/3/11
The main aim of studies was to determine common influences of two different structure refinement methods on EN AW-Al99,5 electrical conductivity and deformability. The first method is internal factor ...
Development of a new aluminium matrix composite reinforced with iron oxide (Fe3O4)
a new aluminium matrix composite iron oxide Fe3O4
2010/1/11
In modern industry, it is more and more enforced to develop new composites, such as high resistant, alternative materials of low density in order to realise multifunctional pieces. The powder metallur...
Purpose: of this paper is investigation of the ability of the high speed roll casting of 5182 aluminium alloy. Appropriate twin roll caster to cast the 5182 strip was researched.
Design/methodology/a...
A Case Based Reasoning aluminium thermal analysis platform for the prediction of W319 Al cast component characteristics
Case Based Reasoning Thermal analysis – Universal Metallurgical Simulator and Analyzer (UMSA) and AlTAP Technology Platforms W319 aluminum alloy
2009/12/14
Purpose: This paper presents the research on the development of the Aluminum Thermal Analysis Technology Platform (AlTAP) utilizing a Case Based Reasoning (CBR) Caspian shell for interpretation of ind...
Stereometry specification of anodised and PVD coated surface of aluminium alloy
Metallic alloys Mechanical properties Metallography
2009/12/3
Purpose: The aim of the work is to present the influence of casting method and anodic treatment parameters on
properties, thickness and structure of an anodic layer with (PVD) physical vapour deposit...
FSW characterization of 6082 aluminium alloys sheets
Friction Stir Welding 6082 aluminium alloy Hardness Microstructure
2009/12/2
Friction stir welding (FSW) technology help joining aluminium sheets, without material preheating. The welding process takes place by a rotating FSW tool. The tool works within welded materials moving...
Identification of phase composition of AlSi5Cu2Mg aluminium alloy in T6 condition
Metallic alloys Electron microscopy Microstructure
2009/12/2
Purpose: The purpose of this paper is to present the results of studies of AlSi5Cu2Mg cast alloy in T6 condition
at an angle of intermetallic phases composition. It was found that the investigated a...
Aluminium EN AC – AlSi12 alloy matrix composite materials reinforced by Al2O3 porous preforms
Composites Ceramic preforms Infiltration
2009/12/1
Purpose: The purpose of this work is to elaborate the method of manufacturing of composite materials based on
porous ceramic preforms infiltrated by eutectic aluminium alloy.
Design/methodology/appr...
The crystallisation of the aluminium bronze with additions of Si, Cr, Mo and/or W
Metallic alloys Aluminium bronze Complex silicides of the iron
2009/12/1
Purpose: The aim of this paper is description of the process of the crystallization of new aluminium bronzes with
the complex silicides of the iron.
Design/methodology/approach: Additions Cr, W, Mo...
Intermetallic phase particles in 6082 aluminium alloy
Metallic alloys Microstructure Electron microscopy Intermetallic phases
2009/12/1
Purpose: In the technical 6xxx Al alloys besides the intentional additions Mg i Si, transition metals and
impurities (Fe and Mn) are always present. Even not large amount of these impurities causes t...
On the friction stir welding of aluminium alloys EN AW 2024-0 and EN AW 5754-H22
Friction stir welding EN AW 2024-0 EN AW 5754-H22 Dissimilar material welding
2009/12/1
Purpose: Purpose of this paper is investigate the friction stir welding capability of the EN AW 2024-0 and EN
AW 5754-H22 Al alloys are studied, because two aluminium alloys are widely used in the in...
Forming of ultrafine grained structure in aluminium by CGP method
Constrained groove pressing aluminium severe plastic deformation
2009/10/23
The severe plastic deformation method known as constrained groove pressing (CGP) was used to produce ultrafine grained (UFG) structure in recrystallized aluminium (99.99%) at room temperature. The imp...
Mechanical Properties of Spray Cast 7XXX Series Aluminium Alloys
Spray deposition 7xxx series Al alloys Strength Fracture toughness
2009/10/12
Mechanical properties of spray deposited and extruded 7xxx series aluminium alloys were investigated in peak aged condition. To study the influence of Zn additions on the mechanical behaviour of spray...
The influence of cerium mixture addition on the structure of cast iron containing about of 5% aluminium
Aluminium cast iron Cooling rate Nodular graphite Chunky-type graphite
2009/7/1
The paper presents the influence of the treatment with cerium mixture and postinoculation with ferrosilicon on the structure of cast iron containing about 5% of aluminium. Rod samples of three differe...