搜索结果: 1-15 共查到“材料科学 aluminium”相关记录47条 . 查询时间(0.083 秒)
Inoculation of pure aluminium aided by electromagnetic field
Foundry sand system Used sand Reclamation Waste management
2011/3/15
The article is devoted to the description of a new integrated system for processing and reclamation of moulding and core sands using the equipment developed by Foundry Research Institute in Krakow. Th...
Influence of Inoculation on Properties of Aluminium EN AW-Al99,5
Mechanical properties Aluminium Titanium Boron Electromagnetic field
2011/3/11
The main aim of studies was to determine common influences of two different structure refinement methods on EN AW-Al99,5 electrical conductivity and deformability. The first method is internal factor ...
Development of a new aluminium matrix composite reinforced with iron oxide (Fe3O4)
a new aluminium matrix composite iron oxide Fe3O4
2010/1/11
In modern industry, it is more and more enforced to develop new composites, such as high resistant, alternative materials of low density in order to realise multifunctional pieces. The powder metallur...
Laser remelting of Al-Fe-TiO powder composite on aluminium matrix
Composites Laser Intermetallic phases
2009/12/14
Purpose: Synthesis of the AlFeTiO3 composite powder lead to formation metal matrix composite layer. The formation of an in-situ surface layer was carried out on aluminium alloy substrate using laser c...
Purpose: of this paper is investigation of the ability of the high speed roll casting of 5182 aluminium alloy. Appropriate twin roll caster to cast the 5182 strip was researched.
Design/methodology/a...
Development of textile-reinforced carbon fibre aluminium composites manufactured with gas pressure infiltration methods
Composites Carbon fibre-reinforced aluminium Pressure infiltration
2009/12/14
Purpose: The aim of his paper is to show potential of textile-reinforced carbon fibre aluminium composite with advantage of the lightweight construction of structural components subjected to thermo-me...
A Case Based Reasoning aluminium thermal analysis platform for the prediction of W319 Al cast component characteristics
Case Based Reasoning Thermal analysis – Universal Metallurgical Simulator and Analyzer (UMSA) and AlTAP Technology Platforms W319 aluminum alloy
2009/12/14
Purpose: This paper presents the research on the development of the Aluminum Thermal Analysis Technology Platform (AlTAP) utilizing a Case Based Reasoning (CBR) Caspian shell for interpretation of ind...
Analysis of structural properties of aluminium skeleton castings regarding the crystallization kinetics
Casting Skeleton casting Solidification
2009/12/3
Purpose: The aim of this research was the definition of technological parameters influence and modification treatment on structural properties of closed skeleton castings. Approach obtained maximal re...
Stereometry specification of anodised and PVD coated surface of aluminium alloy
Metallic alloys Mechanical properties Metallography
2009/12/3
Purpose: The aim of the work is to present the influence of casting method and anodic treatment parameters on
properties, thickness and structure of an anodic layer with (PVD) physical vapour deposit...
Intermetallic phase particles in cast AlSi5Cu1Mg and AlCu4Ni2Mg2 aluminium alloys
Metallic alloys Microstructure Electron Microscopy
2009/12/3
Purpose: In the technical Al alloys even small quantity of impurities - Fe and Mn - causes the formation of new phase components. Intermetallic particles form either on solidification or whilst the al...
Aluminium matrix composites fabricated by infiltration method
Composites Ceramic preforms Infiltration
2009/12/3
Purpose: The aim of this work is to examine the structure and properties of metal matrix composites obtained by infiltration method of porous ceramic preforms by liquid aluminium alloy.
Design/method...
Stereometry specification and properties of anodization surface of casting aluminium alloys
Metallic alloys Mechanical properties Metallography
2009/12/2
Purpose: The aim of the work is presents the influence of casting method and anodic treatment parameters on
properties, thickness and structure of an anodic layer formed on aluminium casting alloys.
...
FSW characterization of 6082 aluminium alloys sheets
Friction Stir Welding 6082 aluminium alloy Hardness Microstructure
2009/12/2
Friction stir welding (FSW) technology help joining aluminium sheets, without material preheating. The welding process takes place by a rotating FSW tool. The tool works within welded materials moving...
Influence of the ageing on mechanical properties of the aluminium alloy AlSi9Mg
Mechanical properties Age-hardening Aluminium
2009/12/2
Purpose: The goal of this paper was study the influence of temperature and time in the age-hardening on the
selected mechanical properties and hardness of the AlSi9Mg alloy.
Design/methodology/appro...
Aluminium matrix composites reinforced with AlN particles formed by in situ reaction
Composites In situ reaction Aluminium nitride
2009/12/2
Purpose: Ultrafine reinforcement particles are formed as product of reaction between reactive components. Those
kinds of materials have good mechanical properties (higher yield stress and creep resis...