工学 >>> 材料科学 >>> 材料科学基础学科 材料表面与界面 材料失效与保护 材料检测与分杂技技术 材料实验 材料合成与加工工艺 金属材料 无机非金属材料 有机高分子材料 复合材料 材料科学其他学科
搜索结果: 1-15 共查到材料科学 alloying相关记录17条 . 查询时间(0.296 秒)
We fabricated ferroelectric Bi4Ti3O12 (BiT) single crystalline thin films site-specifically substituted with LaTMO3 (TM = Al, Ti, V, Cr, Mn, Co, and Ni) on SrTiO3 substrates by pulsed laser epitaxy. W...
During the last few decades the world has seen a rapid growth of application of magnesium and its alloys almost in every field of today's industry. This is due to numerous characteristics of the metal...
In this paper there is presented the laser treatment as a part technology applied for steel surface manufacturing. There is presented laser treatment with remelting of hot work tool steel 32CrMoV12-28...
Purpose: The aim of this paper is to determine the influence of the alloying time and composition on the structure of Ti-Si-C alloy. Design/methodology/approach: The powders of the Ti-Si-C alloys we...
The Ni3Al, which has an Ll2 structure, is an ordered compound which can be a very promising candidate for various high temperature applications. The lack of room temperature ductility and high tempera...
Purpose: The goal of this work is to investigate structure and properties of powdersAl67Ti25Fe8 alloys obtained by mechanical alloying. Design/methodology/approach: The powders of the Al67Ti25Fe8 al...
Purpose: The paper presents results on the mechanical and tribological properties examinations of the X40CRMoV5- 1 hot work alloy tool steel alloyed with carbide powders using the high power diode la...
Purpose: The ultimate aim of this work was to investigate structure and properties massive Fe-6.67%mass.C and Fe-0.4%mass.C materials obtained by mechanical alloying and sintering. Design/methodolog...
This work deals with the influence of alloying elements in aluminium on the grain refinement with various additions of AlTi5B1. Grain-refinement tests were made at a cooling rate of 15 °C/s. The resul...
To eliminate some problems in the production of composites by classical methods, composite producing was performed by oxidising metallic precursor, and mechanically alloyed Ba-Al powders were oxidised...
Laser Surface Alloying of Gold     Alloying  Gold       2009/7/29
Laser Surface Alloying of Gold.
Purpose: The aim of this work is to report the effect of the high energy milling processes, on fabrication of aluminium matrix composite powders, reinforced with a homogeneous dispersion of the inter...
Purpose: The goal of this work is to investigate structure and properties of Fe57.6Co7.2Ni7.2B19.2Si4.8Nb4 powders alloys obtained by mechanical alloying. Design/methodology/approach: The test materi...
Purpose: The aim of this paper is to determine the influence of the mechanical milling process on the structure of Al67Ti25Fe8 alloy.Design/methodology/approach: The powders of the Al67Ti25Fe8 alloys ...
Purpose: The paper presents the influence of alloying with NbC powder by the use of a high-power diode laser and TiAlN, AlSiCrN and TiCN gradient coatings deposition by PVD process on microstructure a...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...