搜索结果: 16-30 共查到“材料科学基础学科 Mechanical properties”相关记录51条 . 查询时间(0.14 秒)
Influence of the ageing on mechanical properties of the aluminium alloy AlSi9Mg
Mechanical properties Age-hardening Aluminium
2009/12/2
Purpose: The goal of this paper was study the influence of temperature and time in the age-hardening on the
selected mechanical properties and hardness of the AlSi9Mg alloy.
Design/methodology/appro...
Correlation between fracture morphology and mechanical properties of NANOPERM alloys
Amorphous materials Heat treatment Mechanical properties
2009/12/2
Purpose: The purpose of this paper is to present of influence of heat treatment on the changes of structure,
ductility, mechanical properties and particularly fracture morphology of the amorphous NA...
The microstructure and mechanical properties of Ni78Ag2P20 alloy
Mechanical properties Amorphous materials Immiscibility Arc melting
2009/12/1
Purpose: The aim of the work was to investigate the influence of silver as a modifying constituent on structure
formation in Ni-P based glass forming matrix and to characterize mechanical properties ...
Microstructure and mechanical properties of high temperature creep resisting superalloy René 77 modified CoAl2O4
Alloys Nickel superalloys Grain refinement
2009/12/1
Purpose: Nickel based superalloys are widely used for turbine and stator blades of compressor in aero-engines.
The objective of this work is to determine the influence of the inoculant’s content (co...
Microstructure and mechanical properties of intermetallics on the base of Fe-Al alloy obtained by casting
Metallic alloys Iron aluminides Fe-Al alloys
2009/12/1
Purpose: The aim of this work is to study the results of investigations of chromium addition influence on a
microstructure and tensile properties of intermetallics from the Fe-Al system based on Fe3A...
The influence of pre – tempering on the mechanical properties of HS18-0-1 high speed steel
Tool materials Pre-tempering Mechanical properties High-speed steel
2009/12/1
Purpose: Main objective of the research presented in this work was the evaluation of the influence of pre-
tempering on the properties of HS18-0-1 steel after principal tempering.
Design/methodology...
Mechanical properties of monolayer coatings deposited by PVD techniques
Thin&thick Coatings Residual stresses Scratch test Young’s modulus
2009/12/1
Purpose: This research was done to investigate the mechanical properties of monolayer coatings (Ti/CrN,
Ti/TiAlN, Ti/ZrN, CrN, TiAl/TiAlN, Zr/ZrN, TiN) deposited by PVD technique (reactive magnetro...
Influence of the heat treatment on the mechanical properties and structure of TWIP steel in wires
Metallic alloys Drawing process Austenitic steel
2009/12/1
Purpose: The aim of this paper is to determine influence of the drawing process of TWIP steel wires on their
mechanical properties and the structure changes.
Design/methodology/approach: The heat t...
Effect of structure on mechanical properties of Cr-Ni-Mo cast steel
Tool materials Cast steel Hypereutectoid cementite Heat treatment Mechanical properties
2009/12/1
Purpose: The paper presents evaluation of the influence of refinement as a result of repeated austenitizing,
cooling rate after repeated austenitizing on the morphology of hypereutectoid cementite an...
The effect of cooling rate on microstructure and mechanical properties of AC AlSi9Cu alloy
Aluminum alloys Cooling rate Thermal characteristics Secondary Dendrite Arm Spacing
2009/12/1
Purpose: In this work the effect of cooling rate on the size of the grains, SDAS, size of the β precipitation and
thermal characteristic results of AC AlSi9Cu cast alloy have been described. The soli...
Mechanical properties and corrosion resistance of dissimilar stainless steel welds
Crack resistance Welded joints Corrosion Duplex stainless steel
2009/12/1
Purpose: The purpose of this paper is to determine the influence of welding on microstructure, mechanical
properties, and stress corrosion cracking resistance of dissimilar stainless steels butt weld...
Complex approach mechanical properties and formability assessment of selected deep-drawing steels
deformation properties fatigue limit surface layer
2009/10/23
The paper analyses the properties of deep-drawing sheets of three grades (Re = 320 to 475 MPa), surface-treated with hot-dip galvanizing, made of microalloyed steels. Deformation properties are assess...
Mechanical Properties of Four Timber Species Commonly Used in Turkey
Timber Compressive strength Flexural strength Toughness Modulus of elasticity
2009/10/9
The mechanical properties of 4 timber species (poplar, fir, pine and hornbeam) commonly used in Turkey were investigated. The compressive strength, flexural strength and toughness were determined both...
Effect of modifying process on mechanical properties of EN AB-42000 silumin cast into sand moulds
Aluminum alloys Modification Mechanical properties
2009/6/30
Technological and mechanical properties of Al-Si casting alloys depend in a considerable extend upon structure of eutectic mixture, which is modified through introduction of micro-additions into liqui...
Effect of silicon on the structure and mechanical properties of high-vanadium cast iron
Mechanical properties Fe-C-V alloy Eutectic alloy Eutectic Cast iron
2009/4/21
The results of microstructural examinations and mechanical tests carried out on Fe-C-V and Fe-C-V-Si alloys solidifying in volumetric mode, containing 1,38-1,83%C, 6,76-14,72%V and 1,05-3,69 Si, have ...