搜索结果: 1-15 共查到“microstructure”相关记录133条 . 查询时间(0.062 秒)
Magneto-induced Microstructure Characterization of Magnetorheological Plastomers using Impedance Spectroscopy
Impedance spectroscopy magnetorheological plastic body the mechanism of microstructure the equivalent circuit model
2013/5/23
An impedance spectroscopy (IS) method is employed to investigate the magneto-induced microstructure mechanism of magnetorheological plastomers (MRP). The IS of MRP with two typical particle distributi...
Effect of heat treatment on the microstructure, hardness and abrasive wear resistance of high chromium hardfacing
destabilized austenite carbide dry rubber wheel test factorial regression GMAW toughness
2013/2/24
The effect of destabilization heat treatment on the microstructure, hardness, fracture toughness and abrasive wear
resistance of high chromium hardfacing was investigated. The results from the study...
Microstructure and magnetorheological properties of the thermoplastic magnetorheological elastomer composites containing modified carbonyl iron particles and poly(styrene-b-ethylene-ethylenepropylene-b-styrene) matrix
Magnetorheological elastomers thermoplastic melt mixing titanate coupling agent the carbonyl iron particles microstructure
2012/10/23
Novel isotropic and anisotropic thermoplastic magnetorheological elastomers (MRE) were prepared by melt blending titanated coupling agent modified carbonyl iron (CI) particles with poly(styrene-b-ethy...
The correlation of deposition parameters,microstructure,and stability of rf-diode sputtered magneto-optical thin films has been studied by using transmission electron microscopy and a magneto-optical ...
Microstructure and Mechanical Behavior of In Situ Primary Si/Mg2Si Locally Reinforced Aluminum Matrix Composites Piston by Centrifugal Cast
Piston Centrifugal casting In situ composite Primary Si Mg2Si
2011/5/12
Al-Si pistons are frequently damaged by burning piston top surface due to elevated combustion temperature, and, by rubbing the first ring groove against the engine cylinder liner. To prevent from thes...
Thermal analysis and microstructure of master alloys used for modification of silumins
Calorimetric analysis Enthalpy of melting and solidification Hypereutectic silumins
2011/3/31
The study presents the technological backgrounds of the process of melting and casting Al-Co, Al-Ni, and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basing on the an...
Thermal analysis and microstructure of master alloys used for modification of silumins
Calorimetric analysis Enthalpy of melting and solidification Hypereutectic silumins
2011/3/31
The study presents the technological backgrounds of the process of melting and casting Al-Co, Al-Ni, and Al-Ti master alloys, used as refiners of the microstructure of cast silumins. Basing on the an...
Microstructure of high-pressure die-casting AM50 magnesium alloy
AM50 magnesium alloy high-pressure die-casting microstructure
2011/2/26
Microstructure analyses of high-pressure die-casting AM50 magnesium alloy are presented. Investigated pressure casting was produced on a cold chamber die-casting machine with locking force at 1100 ton...
Microstructure of high-pressure die-casting AM50 magnesium alloy
AM50 magnesium alloy high-pressure die-casting microstructure
2011/2/26
Microstructure analyses of high-pressure die-casting AM50 magnesium alloy are presented. Investigated pressure casting was produced on a cold chamber die-casting machine with locking force at 1100 ton...
Effect of Heat Input on the Microstructure and Mechanical Properties of 07MnCrMoVR Weld Joints
07MnCrMoVR heat input microstructure impact toughness
2011/2/23
As a new type of low cracking suscepbility high strength steel, 07MnCrMoVR steel has excellent weldability, with low carbon equivalent and cold cracking susceptibility coefficient. However, there are ...
Microstructure and Mechanical Behavior of In Situ Primary Si/Mg2Si Locally Reinforced Aluminum Matrix Composites Piston by Centrifugal Casting
Piston Centrifugal casting In situ composite Primary Si Mg2Si
2011/1/17
Al-Si pistons are frequently damaged by burning piston top surface due to elevated combustion temperature, and, by rubbing the first ring groove against the engine cylinder liner.
Effect of Heat Input on the Microstructure and Mechanical Properties of 07MnCrMoVR Weld Joints
07MnCrMoVR heat input microstructure impact toughness
2011/1/4
As a new type of low cracking suscepbility high strength steel, 07MnCrMoVR steel has excellent weldability, with low carbon equivalent and cold cracking susceptibility coefficient. However, there are ...
Fabrication of a highly nonlinear tellurite complex microstructure fiber for supercontinuum generation
Fiber design and fabrication Nonlinear optics Supercontinuum generation
2010/6/4
A dispersion controlled highly nonlinear tellurite complex microstructure fiber whose chromatic dispersion is flatter than that of the previous ones is realized. Broad supercontinuum generation was de...
Microstructure and properties of laser surface alloyed PM austenitic stainless steel
Microstructure properties laser surface PM austenitic stainless steel
2010/5/12
Laser surface alloying is a unique method where the external alloying elements in the form of powder, past, suspension, electrolytic coatings and plasma or flame sprayed coatings are introduced into a...
Microstructure forming processes of the 26Mn-3Si-3Al-Nb-Ti steel during hot-working conditions
Microstructure forming processes 26Mn-3Si-3Al-Nb-Ti steel hot-working conditions
2010/5/12
In the last few years attention of automotive industry is focused on modern high-strength steels, which allow to decrease the weight of different elements of vehicles, what is directly connected with ...