工学 >>> 信息与通信工程 >>> 信息处理技术 通信技术 广播与电视工程技术 雷达工程
搜索结果: 1-15 共查到信息与通信工程 Quality相关记录29条 . 查询时间(0.137 秒)
The IEEE CQR International Workshop is held annually with the purpose of bringing together industry and academic experts to present and discuss communications quality, reliability and security issues ...
In the recent years, the performance of LiDAR systems was improved by acquisition of the terrain surface with steadily increasing point densities. However, the main error sources affecting the quali...
For achieving high-quality LIDARgrammetry and performing surface reconstruction by 3D point clouds acquired at different locations or in different coordinate systems, a novel method was proposed and i...
We present an automatic method for checking the geometric accuracy of ALS points. First for each strip a DEM is interpolated using the moving planes method. The accuracy of the interpolated height at ...
Airborne Light Detection and Ranging (LiDAR) - also referred to as Airborne Laser Scanning (ALS), provides means for high density and high accuracy topographic data acquisition. LiDAR data have become...
Cartographic maps can only contain a certain amount of information. If the information density is too high, the map becomes hard to comprehend for a human viewer. A common solution for this problem is...
This paper evaluates the quality of SRTM3 data for alpine and plateau areas in Northwestern (NW) China against DEM data extracted from topographic maps. These SRTM data were obtained from both the ESR...
Quick data acquisition using LiDAR, is a way to generate dense accurate DEM. The difference with an image recorded by a standard digital camera is that the LiDAR recorded points do not have a regular ...
The purpose of filtering LIDAR data is to extract the laser points which are truly reflected from the bare ground. However, the results obtained may vary since several engineers are involved in the ma...
In-flight Image Quality calibration and performance assessment activities depend on specific acquisitions and, for some of them, on dedicated guidance of the satellite platform. The operational constr...
A comparison of erythemally weighted surface UV irradiance observations with similar NASA TOMS surface UV determinations is described. Comparisons are made for two observation periods: the Robertson-...
Professionals of various backgrounds have recognized the value that the use of geospatial imagery can add to their analysis. They take advantage of the widespread availability of data in vast image ...
The ability to monitor and detect problematic distortions in the received GPS-SPS signal is a task of critical importance. Detection of these satellite signal anomalies or “evil waveforms” (EWFs) can ...
The integrity of the Wide Area Augmentation System (WAAS), being developed for the FAA, is of significant concern because of its intended use in commercial aviation navigation applications.
The Signal Quality Monitor (SQM) is an integrity monitor for the Wide Area Augmentation System (WAAS). The monitor detects L1 signal waveform deformation of a GPS or a Geosynchronous (GEO) satellite m...

中国研究生教育排行榜-

正在加载...

中国学术期刊排行榜-

正在加载...

世界大学科研机构排行榜-

正在加载...

中国大学排行榜-

正在加载...

人 物-

正在加载...

课 件-

正在加载...

视听资料-

正在加载...

研招资料 -

正在加载...

知识要闻-

正在加载...

国际动态-

正在加载...

会议中心-

正在加载...

学术指南-

正在加载...

学术站点-

正在加载...