搜索结果: 1-15 共查到“光学工程 Solid”相关记录30条 . 查询时间(0.186 秒)
第十六届固态照明和LED照明系统国际会议（Sixteenth International Conference on Solid State Lighting and LED-based Illumination Systems）
第十六届 固态照明和LED照明系统 国际会议
2017/4/25
第十六届固态照明和LED照明系统国际会议（Sixteenth International Conference on Solid State Lighting and LED-based Illumination Systems）。
2017OSA固态照明专题会议（Solid-State Lighting）
2017 OSA 固态照明 专题会议
2017/4/25
Within the next 25 years, SSL will become the cornerstone of a revolution in lighting. Incandescent and gas discharge lamps will be replaced by highly efficient organic and inorganic semiconductor dev...
3D SOLID REPRESENTATION AND VISUALIZATION FOR LARGE HETEROGENEOUS SITES WITH URBAN AND RURAL HERITAGE - A CASE STUDY
3D modeling of complex sites and architectures Visualization issues for large and complex sites
2015/10/8
This article introduces usage of 3D solid modeling methods in order to represent and visualize highly complex environments such as
large heterogeneous sites integrating urban and rural heritage cont...
Comprehensive analyses based on the rigorous vector diffraction theory were used to simulate the polarized readout signals using a solid immersion lens (SIL) in reading phase change (PC) disks. For an...
Reduction of Crosstalk by Quasi-Homogeneous Solid Multi-Core Fiber
Fiber characterization Fiber design fabrication
2010/6/10
Power-conversion efficiency reduction on a quasi-homogeneous solid multi-core fiber is numerically investigated. The fiber length dependence of measured crosstalk of fabricated fibers is in good agree...
Actively Doped Solid Core Photonic Bandgap Fiber
Fiber optics and optical communications Fiber optics amplifiers and oscillators Lasers and laser optics Lasers fiber Fiber optics and optical communications : Photonic crystal
2010/6/10
Solid photonic bandgap fibers offer distributed spectral filtering with extraordinarily high suppression. This opens new possibilities of artificially tailoring the gain spectrum of fibers. We present...
A Broadband Ultra-low Loss All-solid Photonic Bandgap Fiber
Fiber design fabrication Photonic crystal fiber
2010/6/10
We describe the fabrication and characteristic of an all-solid photonic bandgap fiber with loss as low as 0.41dB/km at 1550nm within the first-order bandgap. The control of bandgaps,dispersion and ben...
Reducing spectral attenuation in solid-core photonic crystal fibers
Fiber optics optical communications Microstructured fibers
2010/6/10
We describe the effects of fabrication process timing and preform exposure to atmospheric air on spectral attenuation in photonic crystal fibers. The lowest attenuation is achieved by rapid processing...
All-Solid Single-Trench-Assisted Bend-Insensitive Fibers:Performances and Deployment Aspects
Fibers single-mode Fiber properties
2010/6/5
We demonstrate how all-solid single-trench-assisted (ultra-) bend-insensitive fibers meet the FTTH market requirements and growing needs. High manufacturing robustness,excellent splicing performances ...
Four-wave mixing-based wavelength conversion in a Short-Length of a Solid 1D Microstructured Fibre
wavelength conversion Short-Length Microstructured Fibre
2009/7/20
We demonstrate a four-wave mixing based wavelength conversion scheme at 1.55μm in a 1.5m long highly nonlinear, dispersion tailored one-dimensional (1D) soft glass microstructured optical fibre.
Linearly-Polarized Lasing at 1180 nm Using Polarization-Maintaining Yb-Doped Solid Photonic Bandgap Fiber
Linearly-Polarized Lasing Polarization-Maintaining Yb-Doped Solid Photonic Bandgap
2009/7/16
Linearly-polarized lasing at 1180 nm is demonstrated by utilizing polarization maintaining Yb-doped solid photonic bandgap fiber. The extinction ratio of the output light between two lineary-polarized...
Ultra-Low Loss All-Solid Photonic Bandgap Fibre
Ultra-Low Loss All-Solid Photonic Bandgap Fibre
2009/7/14
We fabricate and characterize an all-solid photonic bandgap fibre with ultra-low transmission loss of 0.65dB/km within the firs-order bandgap band of 1500~1600nm. The bending characteristic of the fib...
Large Mode Area Single-Mode Ytterbium Doped All-Solid Photonic Bandgap Fiber
Large Mode Area Single-Mode Ytterbium Doped All-Solid Photonic Bandgap Fiber
2009/7/14
We report on a new fiber design: an ytterbium-doped single-mode all-solid photonic bandgap fiber with a MFD of 18 micrometers. This fiber design has the potential for scaling to larger MFD.
Bend-Insensitive and Effectively Single-Moded All-Solid Photonic Bandgap Fibers with Heterostructured Cladding
Bend-Insensitive Effectively Single-Moded All-Solid Photonic Bandgap Fibers Heterostructured Cladding
2009/7/14
We propose a novel concept of cladding structure in all-solid photonic bandgap fibers. It promises low bending and confinement losses with single-mode operation. The mechanism is based on the new conc...
Highly Focusing 1-kW All-Solid-State Laser
Solid-state-laser Diode pumped Frequency conversion
2009/6/12
We have developed an all-solid-state laser with high energy pulses and high brightness. In 2001 fiscal year, we produced the average output power of 1050 W with the beam-quality of about 8 times the d...